1 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com a4 045_peg130 ? 6/8/2016 benefts ? next-generation high performance axial series ? ve ry long operational life (up to 160,000 hours at 80c) ? mi nimal heat generation ? lo w esr electrolyte/paper system ? av ailable with capacitances as high as 6,300 f and voltage options of 25, 40, and 63 vdc ? po larised all-welded design ? ou tstanding electrical performance overview kemet's peg130 series is an electrolytic capacitor with outstanding electrical performance. this product is constructed in a polarized, all-welded design with tinned copper wire leads and the negative pole connected to the case of the capacitor. the peg130 winding is housed in a cylindrical aluminum can with a high purity aluminium lid and a high quality rubber gasket. the low esr is a result of a low resistive electrolyte/paper system and an all-welded design. applications kemet's peg130 is a new generation of high performance axial electrolytic capacitors, designed for applications with very long service life requirements. the capacitors are especially suitable for led/lamp power supplies, automotive and low voltage power electronic applications. axial aluminum electrolytic capacitors peg130 series, 105oc part number system peg130 h h 436 0 q l1 series rated voltage (vdc) size code capacitance code (f) version capacitance tolerance packaging axial aluminum electrolytic h = 25 k = 40 m = 63 see dimension table the last two digits represent signifcant fgures. the frst digit indicates the total number digits. 0 = standard q = -10 +30% see ordering options table one world. one kemet
2 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com a4 045_peg130 ? 6/8/2016 performance characteristics item performance characteristics capacitance range 900 C 6,300 f rated voltage 25 C 63 vdc operating temperature -40 to +105c capacitance tolerance -10/+30% at 100 hz / +20c operational lifetime 45,000 hours at +105c (hours, d = 20 mm) shelf life 5,000 hours at +105c or 10 years at +40c 0 vdc leakage current i = 0.003 cv + 4.0 (a) c = rated capacitance (f), v = rated voltage (vdc). voltage applied for 5 minutes at +20c. vibration test specifcations procedure requirements 0.75 mm displacement amplitude or 10 g maximum acceleration. vibration applied for three 2-hour sessions at 10 C 2,000 hz (capacitor clamped by body). no leakage of electrolyte or other visible damage. deviations in capacitance and tan from initial measurements must not exceed: c/c < 5%. standards iec 60384C4 long life grade 40/125/56 compensation factor of ripple current (rc) vs. frequency frequency 100 hz 300 hz 1 khz 5 khz 100 khz coeffcient 0.35 0.57 0.80 1.00 1.04 test method & performance endurance life test conditions performance temperature +105c test duration 12,000 hours ripple current maximum ripple current specifed in table voltage the sum of dc voltage and the peak ac voltage must not exceed the rated voltage of the capacitor performance the following specifcations will be satisfed when the capacitor is tested at +20c: capacitance change within 15% of the initial value equivalent series resistance does not exceed 200% of the initial value leakage current does not exceed leakage current limit axial aluminum electrolytic capacitors C peg130 series, 105oc
3 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com a4 045_peg130 ? 6/8/2016 ordering options table packaging kind lead length (mm) lead and packaging code standard packaging options bulk (box) 40 +3/-2 l1 dimensions C millimeters side view end view (+) l l1 d length to lead bend polarity indicator ll ll d + + size code dimensions in mm bulk approximate weight grams d 0.5 1 minimum 0.03 +/-2 h 20 29.0 35.0 1.0 40 13 j 20 37.0 43.0 1.0 40 20 l 20 46.0 52.0 1.0 40 24 note: l1 is kemet's recommendation for minimum distance between symmetrical lead bend. available only for customer specifc part numbers. lead bend dimensions must be specifed and confrmed per article. axial aluminum electrolytic capacitors C peg130 series, 105oc
4 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com a4 045_peg130 ? 6/8/2016 shelf life the capacitance, esr and impedance of a capacitor will not change signifcantly after extended storage periods, however the leakage current will very slowly increase. kemet products are particularly stable and allow a shelf life in excess of ten years at 40c. see sectional specifcation under each product series for specifc data. failure rate estimated feld failure rate: 0.15 ppm (failures per year/produced number of capacitors per year). the expected failure rate for this capacitor range is based on feld experience for capacitors with structural similarity. environmental compliance as an environmentally conscious company, kemet is working continuously with improvements concerning the environmental effects of both our capacitors and their production. in europe (rohs directive) and in some other geographical areas like china, legislation has been put in place to prevent the use of some hazardous materials, such as lead (pb), in electronic equipment. all products in this catalog are produced to help our customers obligations to guarantee their products and fulfll these legislative requirements. the only material of concern in our products has been lead (pb), which has been removed from all designs to fulfll the requirement of containing less than 0.1% of lead in any homogeneous material. kemet will closely follow any changes in legislation world wide and makes any necessary changes in its products, whenever needed. some customer segments such as medical, military and automotive electronics may still require the use of lead in electrode coatings. to clarify the situation and distinguish products from each other, a special symbol is used on the packaging labels for rohs compatible capacitors. because of customer requirements, there may appear additional markings such as lf (lead free) or lfw (lead free wires) on the label. axial aluminum electrolytic capacitors C peg130 series, 105oc
5 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com a4 045_peg130 ? 6/8/2016 table 1 C ratings & part number reference operational life operational life (l op ) at ambient temperature t a and ripple current i ac . example: article: peg130hh4360q (20 x 27 mm) ambient temperature (t a ): +80c ripple current, at 5 khz (i ac ): 5.9 a i rac (+105c, 5 khz)= 2.7 a (from data table) i ac / i rac (+105c)= 2.2 operational life: interpolation between the l op -curves l op ~80 kh (blue curves) vdc rated capacitance size code case size ripple current maximum esr maximum part number 100 hz 20c (f) d x l (mm) 100 hz 105c (a) 5 khz 60c (a) 5 khz 80c (a) 5 khz 100c (a) 5 khz 105c (a) 100 hz 20c (m) 100 khz 20c (m) 5C100 khz 105c (m) 25 3600 h 20 x 29 1.72 8.9 7.2 4.1 2.7 47 32 16.6 peg130hh4360ql1 25 4800 j 20 x 37 2.11 10.8 8.8 4.9 3.2 36 24 13.0 peg130hj4480ql1 25 6300 l 20 x 46 2.45 12.1 9.9 5.5 3.6 30 21 11.3 peg130hl4630ql1 40 2000 h 20 x 29 1.44 8.8 7.2 4.0 2.6 59 32 17.0 peg130kh4200ql1 40 3000 j 20 x 37 1.85 10.7 8.7 4.9 3.2 42 24 13.1 peg130kj4300ql1 40 3900 l 20 x 46 2.18 12.3 10.0 5.5 3.6 33 19 11.3 peg130kl4390ql1 63 900 h 20 x 29 1.06 7.2 5.9 3.3 2.2 94 40 25.1 peg130mh3900ql1 63 1400 j 20 x 37 1.40 9.0 7.4 4.1 2.7 64 29 18.8 peg130mj4140ql1 63 1800 l 20 x 46 1.65 10.4 8.4 4.7 3.1 51 24 15.9 peg130ml4180ql1 vdc rated capacitance size code case size ripple current esr part number axial aluminum electrolytic capacitors C peg130 series, 105oc
6 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com a4 045_peg130 ? 6/8/2016 packaging quantities size code packaging quantities bulk h 150 j 125 l 100 marking capacitance, rated voltage (vdc) part number kemet logo, polarity marks 4 digit date code (year, week), batch number construction detailed cross section margin rubber gasket aluminum can welded terminal tab (+) tinned copper wire lead (+) aluminum can tinned copper wire lead (-) paper spacer impregnated with electrolyte (first layer) paper spacer impregnated with electrolyte (third layer) anode aluminum foil, etched, covered with aluminum oxide (fourth layer) cathode aluminum foil, etched (second layer) high purity aluminum lid rubber gasket high purity aluminum lid welded terminal tab (+) tinned copper wire lead (+) welded terminal tab (-) tinned copper wire lead (-) axial aluminum electrolytic capacitors C peg130 series, 105oc
7 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com a4 045_peg130 ? 6/8/2016 construction cont'd the manufacturing process begins with the anode foil being electrochemically etched to increase the surface area and then formed to produce the aluminum oxide layer. both the anode and cathode foils are then interleaved with absorbent paper and wound into a cylinder. during the winding process, aluminum tabs are attached to each foil to provide the electrical contact. the winding is assembled to the capacitor aluminum can and to the aluminum lid. the can is flled with electrolyte and the winding is impregnated during a vacuum treatment. the capacitor is sealed. throughout the process, all materials inside the housing must be maintained at the highest purity and be compatible with the electrolyte. each capacitor is aged and tested before being packed. the purpose of aging is to repair any damage in the oxide layer and thus reduce the leakage current to a very low level. aging is carried out at elevated temperature and is accomplished by applying voltage to the device while carefully controlling the supply current. the process takes between 2 and 20 hours, depending on voltage rating. damage to the oxide layer can occur due to a variety of reasons: ? sl itting of the anode foil after forming ? at taching the tabs to the anode foil ? mi nor mechanical damage caused during winding the following tests are applied for each individual capacitor. electrical: ? l eakage current ? c apacitance ? e sr ? ta n delta mechanical/visual: ? p ull strength test of wire terminals ? p rint detail ? bo x labels ? p ackaging, including packed quantity axial aluminum electrolytic capacitors C peg130 series, 105oc forming winding assembly filling (elyt) impregnation testing labeling packing sealing anode foil cathode foil tissues foil tab aging etching
8 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com a4 045_peg130 ? 6/8/2016 kemet corporation world headquarters 2835 kemet way simpsonville, sc 29681 mailing address: p.o. box 5928 greenville, sc 29606 www.kemet.com tel: 864-963-6300 fax: 864-963-6521 corporate off ces fort lauderdale, fl tel: 954-766-2800 north america northeast wilmington, ma tel: 978-658-1663 southeast lake mary, fl tel: 407-855-8886 central novi, mi tel: 248-994-1030 irving, tx tel: 972-915-6041 west milpitas, ca tel: 408-433-9950 mexico guadalajara, jalisco tel: 52-33-3123-2141 europe southern europe sasso marconi, italy tel: 39-051-939111 skopje, macedonia tel: 389-2-55-14-623 central europe landsberg, germany tel: 49-8191-3350800 kamen, germany tel: 49-2307-438110 northern europe wyboston, united kingdom tel: 44-1480-273082 espoo, finland tel: 358-9-5406-5000 asia northeast asia hong kong tel: 852-2305-1168 shenzhen, china tel: 86-755-2518-1306 beijing, china tel: 86-10-5877-1075 shanghai, china tel: 86-21-6447-0707 seoul, south korea tel: 82-2-6294-0550 taipei, taiwan tel: 886-2-27528585 southeast asia singapore tel: 65-6701-8033 penang, malaysia tel: 60-4-6430200 bangalore, india tel: 91-806-53-76817 note: kemet reserves the right to modify minor details of internal and external construction at any time in the interest of product improvement. kemet does not assume any responsibility for infringement that might result from the use of kemet capacitors in potential circuit designs. kemet is a registered trademark of kemet electronics corporation. axial aluminum electrolytic capacitors C peg130 series, 105oc
9 ? kemet electronics corporation ? p.o. box 5928 ? greenville, sc 29606 (864) 963-6300 ? www.kemet.com a4 045_peg130 ? 6/8/2016 disclaimer all product specif cations, statements, information and data (collectively, the information) in this datasheet are subject to change. the customer is responsible for checking and verifying the extent to which the information contained in this publication is applicable to an order at the time the order is placed. all information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. statements of suitability for certain applications are based on kemet electronics corporations (kemet) knowledge of typical operating conditions for such applications, but are not intended to constitute C and kemet specif cally disclaims C any warranty concerning suitability for a specif c customer application or use. the information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. any technical advice inferred from this information or otherwise provided by kemet with reference to the use of kemets products is given gratis, and kemet assumes no obligation or liability for the advice given or results obtained. although kemet designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. although all productCrelated warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. axial aluminum electrolytic capacitors C peg130 series, 105oc
|
